In October 2026, DenTech China 2026, one of Asia's largest and most international dental exhibitions, concluded successfully in Shanghai. Guangdong Beiming Technology Co., Ltd. (B&M Dental Solution) took part under the theme "5-Axis Precision, Full Digital Chain", presenting five flagship dental milling machines to dentists, dental laboratories, distributors and trade media from Europe, Southeast Asia, the Middle East and South America. The four-day event closed with a full pipeline of qualified enquiries and several initial distribution agreements.
Five Flagship Machines on One Booth: From Chairside to Industrial Production
Rather than displaying a single hero machine, Beaming organised the booth around five production tiers, allowing visitors to compare configurations, materials and throughput side by side:
| Model |
Key configuration |
Machinable materials |
Best for |
| SK-5A PLUS |
True 90-degree cutting, A axis 360 degrees / B axis +30 to -90 degrees; electric spindle with no external air supply; automatic calibration of tool length and blank position; 60,000 RPM, 12-tool magazine, +-0.01 mm accuracy; one-piece body |
Zirconia, glass ceramics, resin, pre-milled titanium abutments |
Single and multi-unit crowns and bridges, implant restorations, chairside and high-end labs |
| SK-10A PLUS |
Full servo drive, 5-axis linkage (A axis 360 degrees / B axis +35 to -90 degrees); 18-disc automatic material magazine, 12-tool capacity; 1500 W, 60,000 RPM, +-0.01 mm accuracy |
Zirconia, PMMA, wax, resin and nanocomposite |
High-volume dental labs and milling centres, unattended night-shift production |
| SK-5C PLUS |
1000 W full servo, 60,000 RPM; 10-tool magazine; dry and wet milling; live process monitoring; compact footprint with air-cooled spindle, +-0.02 mm accuracy |
Zirconia, glass ceramics, PMMA, wax, pre-milled titanium abutments |
Small and mid-size labs, chairside clinics, training institutions |
| SK-2000 |
Independent dual chambers for dry and wet milling; 3200 W system with 2.5 kW water-cooled spindle, 0-60,000 RPM; 24-tool magazine; 5-axis (A 360 degrees / B +30 to -90 degrees), +-0.01 mm accuracy |
Zirconia, glass ceramics, pre-milled abutments, titanium discs, resin |
Mixed-material, mixed-order production; one machine for clinic and lab |
| SK-5B |
4500 W servo drive, 0-60,000 RPM; 24-tool automatic changer; A axis 360 degrees / B axis +-30 degrees; water-cooled wet milling; rigid cast aluminium frame, 0.02 mm accuracy |
Titanium blanks, glass ceramics, pre-milled abutments |
High-strength materials, implant abutments, industrial-scale output |
Live Cutting Demonstrations Focused on Precision, Automation and Compatibility
Throughout the show the engineering team ran continuous live milling sessions on zirconia crowns, veneers and pre-milled abutments. Visitor questions concentrated on three themes:
- Precision: the SK-5A PLUS, SK-10A PLUS and SK-2000 hold +-0.01 mm, matching the requirements of veneers and implant superstructures;
- Automation: the 18-disc magazine of the SK-10A PLUS and the 24-tool changers of the SK-5B and SK-2000 make unattended and overnight production realistic, cutting manual intervention sharply;
- Compatibility: every machine connects to mainstream intraoral scanners and CAD/CAM design software, so laboratories can digitise without replacing their existing workflow.
The SK-5A PLUS attracted particular attention. Its B axis swings from +30 to -90 degrees to deliver a true 90-degree cut on cases that three-axis or limited-swing mills cannot reach, while the electric spindle removes the need for an external air compressor and self-calibrates tool length and blank position before each job. Several overseas visitors commented that Chinese-built dental milling equipment now balances stability, configuration completeness and cost-effectiveness, and moved directly into sample-machine orders, regional agency and OEM discussions.
From Single Machines to Complete Digital Workflows
- Technical support: remote diagnostics and process parameter tuning for material and strategy matching;
- Training: online and on-site programmes covering operation, daily maintenance and troubleshooting;
- Spare parts: stocked spindles, burs and fixtures to minimise downtime;
- Customisation: voltage, interface language and appearance options for different markets.
Results and Next Steps
During the exhibition Beaming received professional visitors from dozens of countries and regions, collected a substantial number of qualified enquiries and reached preliminary cooperation agreements with several regional distributors. Company management noted that DenTech China is a key window on global dental market trends, where digitisation, automation and chairside immediate restoration have become clear directions, and that these priorities shaped the selection of the five flagship machines on display.
The team will consolidate customer requirements and follow up quotations within one week after the show, and will continue exhibiting at international dental events to bring its 5-axis digital milling solutions to more overseas markets.
Beaming thanks every partner and industry friend who visited the booth. The company will continue to support dental laboratories and clinics worldwide with stable machine performance, a complete product matrix and responsive technical service.
আপনার বার্তাটি 20-3,000 টির মধ্যে হতে হবে!
english
français
Deutsch
Italiano
Русский
Español
português
Nederlandse
ελληνικά
日本語
한국
العربية
हिन्दी
Türkçe
indonesia
tiếng Việt
ไทย
বাংলা
فارسی
polski
